3. FRONT PANEL
3.1 CONTROLS
Switches the unit ON. To conserve battery life the unit will switch off 5 mins
after the last key operation. If automatically switched off all measurement
parameters will be restored when switched on again.
Switches the unit OFF. This will reset the instrument to the 6 m range, (or
equivalentin feetor time), GainA1, 2 ns pulse and LINE mode.PVF,units and
impedance will remain as they were before switch off.
Rotary control to adjust the contrast of the screen display.It is recommended
that it is set to the mid position on switch on to obtain a display.
CURSORS – two independent cursors
Adjusts the position of the appropriate cursor. Cursors move left or right as
indicated.If held down the cursor initiallymoves slowlyand willthen accelerate.
The cursor being moved is displayed as a solid line, the passive cursor is a
broken line.
T631 OPERATING MANUAL 11
Radiodetection Ltd. 00901209-6
To Next Page
Loading...
