Radiodetection T631 TDR - Programming from the Help Menu

Thedistance units, impedanceand the Propagation VelocityFactorMode (i.e.PVF,V, or
V
2
)
can be re-programmed via the HELP menu and once programmed will be set automatically
on switch on thereafter.
Should the unit switch off automatically, the last established machine settings are restored
when the unit is switched on.
7.3 PROGRAMMING FROM THE HELP MENU
7.3.1 DISTANCE UNITS
Press HELP key to obtain the Menu.
Selects UNITS by pressing the key indicated.
Select Feet, Metres or Time by pressing the appropriate key.
7.3.2 DIELECTRIC PARAMETERS
Press HELP key to obtain the Menu.
Select DIELECTRIC by pressing the key indicated.
Select PVF, V, or
V
2
by pressing the appropriate key.
Radiodetection Ltd. 00901209-6
T631 OPERATING MANUAL 22