RadioLink R12DS - S-BUS Signal Output Mode

2
2. S-BUS signal working mode:
Receiver indicator is Blue (Purple) with 12 channels output in total and
synchronously output SBUS and PWM signal.
S-BUS signal channel (marked in BLUE) outputs 12 channels of S-BUS signal
while PWM signal channels (CH3 to CH12 marked in BLUE) output
PWM signals with 12 channels in total. The actual channel quantity of PWM
signal output depends on that of SBUS signal output used. (E.g. If 4 channels
are used for SBUS signal output then there are only 8 channels of PWM signal
output left.)