SBUS and PWM signal change:
Short press the binding button twice within 1 second to switch the
S-BUS&PWM signal to PWM signal. When the Red indicator is on, signal output
is PWM of totally 11 channels. When the Blue/Purple LED is on, signal output is
SBUS&PWM of 12 channels.
How to bind to receiver and transmitter:
1. Put the transmitter and the receiver close to each other (about 50
centimeters) and power both on.
2. Switch on the transmitter and the RED led on R12DS will be on.
To Next Page
Loading...
