RADWAG AS PLUS Series User Manual

- 97 -
An example:
Command:
LDS_1<CR><LF>
– set last digit option to value ‘always’
Response:
LDS_OK<CR><LF>
– ‘always’ value set
User logging
Format: LOGIN_Nazwa,Hasło CR LF
where: _- space (enter name and password in a form provided by the balance – lower-case letters
and upper-case letters)
Response options:
LOGIN OK CR LF
– command understood, new operator logged in
LOGIN ERRROR CR LF
– command understood, name or password error occurrence, logging
operation cannot be carried out
ES CR LF
– command not understood (format error)
User logout
Format: LOGOUT CR LF
Response options:
LOGOUT OK CR LF
- command understood, operator logged out
ES CR LF
- command not understood (format error)

RADWAG AS PLUS Series Specifications

General

Display	LCD with backlight
Power Supply	100-240 V AC 50/60 Hz
Calibration	Internal / External
Interface	RS232, USB-A, USB-B
Operating Temperature	+10° - +40°C
Pan Size	ø 85 mm
Repeatability	0.1 mg
Linearity	±0.2 mg
Stabilization time	2-3 seconds