Entering Administrator’s password
Enter a password for the balance administrator (a sequence of 6 digits) and for the
user. Balance administrator has full access to balance menu. The user access is
limited to the one described in previous point (balance menu, startup, adjustment, etc.
options can be attributed YES/NO).
It is very important to remember the password, as if option “password on startup” is
enabled (set to YES), then on the following plugging the balance to mains, the
software will request for entering the password. If it is entered incorrectly, then balance
operating will be blocked.
While entering the password use balance keys presented on Fig. 2 or use external
keyboard PS/2 type connectable to balance’s socket.
Set accessibility criterion to other balance settings and functions, depending on
access level required by the balance user.
Fig. 12. Keys on balance overlay – entering values while editing fields of balance
menu
To Next Page
Loading...
Need help?
General