On selecting appropriate time format accept it by pressing ENTER key.
12 hour time format is differentiated by letters PM or AM present on printouts.
03 Time
Press RIGHT ARROW KEY to enter parameter 03 Time, as presented on below figure.
Fig. 21. Submenu Date / Time – time setting
Place the marker next to a value to be edited (Hour, Minute, Second). Activate a field for
editing by pressing RIGHT ARROW KEY. Press UP and DOWN ARROWS to set numeric
values of hour / minute / second.
Fig. 22. Submenu Date / Time – time setting – controlling keys
Accept set value (the last digit stops flickering).
Repeat the activity for other time values. On setting the new time value press ENTER key.
The balance returns to displaying submenu P3 Date/Time. The time value visible in the
upper bar graph of the display is changed.
On setting required time value return to weighing mode as specified in point 7.1.2 of this
user manual.
To Next Page
Loading...
Need help?
General