%B Reference mass PERCENT SETUP
%A Filter
ANIMAL WEIGHING
%b Threshold (limit)
%i Liquid
DENSITY DETERMINATION
%p Procedure
%c Temperature
%a Liquid density
%v Sinker volume
Static variables available in all working modes except for weighing (basic mode)
%n Measurement no.
%x Average value
%S Sum
%M Maximum value
%D Difference between max and min value
%s Standard deviation
%r Variance factor
Variable available in all working modes and accepting a value related to an enabled
working mode
%V – Mass in current measuring unit. Variable value is combined with an active
working mode, e.g. number of counted parts in Parts Counting mode or
deviation from reference mass in % in the Percent Setup mode
Special signs for designing a non-standard printout template
\\ Single “\” sign
\c CRLF
\r CR
\n LF
\t Tabulator
\s Skip to the following text ”string”
\0 End of a printout template
Each text string (Text 1 ÷ 89 Text 80) can contain up to 8 characters (letters, digits, special
signs, space). Inputting a sentence comprising multiple words and signs requires using a
set of neighbouring 8-character text strings. A user can add special signs to include
needed variables in a non-standard printout template.
To Next Page
Loading...
Need help?
General