RADWAG R Series User Manual

- 90 -
OMI CR LF
n_”Nazwa modu” CR LF:
n_”Nazwa modu” CR LF
OK CR LF
–
command carried out,
response:
accessible working modes
OMI_I CR LF
– command understood but not
accessible at this moment
Mode name – parameter, working mode name, inserted in between inverted comas. The name takes
form given on a particular balance display, it is provided in a currently selected language.
n – parameter, decimal value determining working mode number.
n →
1 – Weighing
2
– Parts Counting
3
– Deviations
4
– Dosing
5
– Formulas
6
– Animal Weighing
8
– Solids Density
9
– Liquids Density
10
– Peak Hold
11
– Totalizing
12
– Checkweighing
13 – Statistics
CAUTION! Working modes numbering is identical for each kind of balance. The numbers are assigned to
working modes names. Some balances give only the number as a response.
An example 1:
Command:
OMI CR LF
– return
accessibl
e
working
modes
Response:
OMI CR LF
2_”
Parts counting” CR LF
4_”
Dosing” CR LF
12_”
Checkweighing” CR
LF
–
accessibl
e
working
modes
are given
in return:
mode
number
+ name
OK CR LF
–
comman
d carried
out
An example 2:
Command:
OMI CR
LF
– return
accessibl
e
working
modes
Response:
OMI CR LF
2 CR
LF
4
CR LF
12
CR LF
–
accessibl
e
working
modes
are given
in return:
mode

RADWAG R Series Specifications

General

Brand	RADWAG
Model	R Series
Category	Scales
Language	English