Radwin Transportation FiberinMotion - Configuring the Co-Channel Neighbor Interference Mitigation Option

FinMDeploymentGuide Release4.5.10 4‐21
ConfiguringtheCo‐ChannelNeighborInterferenceMitigationOption ConfiguringtheRadioNetwork

Figure4‐11:Dividingtimeslotsbetweenco‐channelneighbors
Thissplittingoftimeslotsisenabledonlyiftheactivationconditionsdescribedabove(see
ActivationConditions)aremet.
Thingscanchangerapidly,soatthemomentthede‐activationconditionsaremet(seeDe‐
ActivationConditions),thedivisionoftimeslotsisnolongercarriedout.
Whentheconditionsreturntotheactivationconditions,thedivisionoftimeslotsisrenewed.
4.5.4ConfiguringtheCo‐ChannelNeighborInterference
MitigationOption
ConfigureeachTBSfor“Co‐ChannelNeighborInterferenceMitigation”asfollows:
5. OpentheConfigurator.
6. SelecttheMaintab
7. ClickUnprotect.
8. EnterthepasswordandclickOK.
9. SelecttheProjecttab(seeFigure 4‐12):
TBS1
TBS4
TBS7
TMU1
TMU4
TMU7
ReceivesTBS1timeslotsonly
TimeslotassignedtoTBS4
TimeslotassignedtoTBS1
ReceivesTBS4timeslotsonly
TimeslotassignedtoTBS4
TimeslotassignedtoTBS1andTBS7
ReceivesTBS7timeslotsonly
TimeslotassignedtoTBS4
TimeslotassignedtoTBS7