Radwin Transportation FiberinMotion - TMU External Connections; Grounding; TBS and OSU

FinMDeploymentGuide Release4.5.10 2‐50
TMUExternalConnections SiteInstallation
2.5.6TMUExternalConnections
Figure2‐83:TMU‐ExternalConnections
2.6Grounding
AllRADWINproductsshouldbegroundedduringoperation.Inaddition:
• Allunitsshouldbegroundedbyawirewithdiameterofatleast10AWG.
UnitsmustbeproperlygroundedtoaProtectiveGroundinaccordancewiththeLocal
ElectricalRegulations
• Rack‐mountedequipmentshouldbemountedonlyingroundedracksandc
abinets.
Further,youshould‐
• Alwaysmakethegroundconnectionfirstanddisconnectitlast
• Neverconnecttelecommunicationcablestoungroundedequipment
• Ensurethatallothercablesaredisconnectedbeforedisconnectingtheground
TBSandOSU
ThereisagroundinglugontheTBSandOSUasshowninFigure 2‐84.Grounditusing 10AWG
wire.