Radwin Transportation FiberinMotion - Mounting on a Wall; Poe Devices for the TMU

FinMDeploymentGuide Release4.5.10 2‐46
PoEDevicesfortheTMU SiteInstallation
c. PlaceTMUoverthepinsontherightsideofthedrawerasshown,andat tachusing
allenscrews.
Figure2‐77:AttachingTMUtodrawer
2.5.4PoEDevicesfortheTMU
TheDCPoEdeviceisalwaysmountednexttotheTMU.
Theunitscanbemountedina19inrack,ashelf,oronawal.
MountingwiththeTMU‐PoEdrawer
TheTMU‐PoEdrawerisusedtomountboththeTMUandthePoE.Followtheinstructionsin
“Mountingonawall”onpage2 ‐45.
MountingonaDINrack
ThePoEcanbemountedonaDINrack.CarryoutthefollowingstepstomountthePoEona
DINrack:
TheTMUandPoE,whenmountedintheTMU‐PoEdraw er,aregroundedviathe
mountingpins,throughthe19inrack.
Makesuretherackyouareusingisgroundedproperly.