Radwin Transportation FiberinMotion - Page 23

FinMDeploymentGuide Release4.5.10 2‐10
TBSMounting SiteInstallation
Figure2‐15:Rotatebaseplateclockwise90
o
forhorizontalpole
2. Fastenthestandoffstothebaseplateintheholeslabeled“H”asshown:
Figure2‐16:Fastenstandoffstobaseplate(forhorizontalpole)
3. PlacetheTBSasshownoverthestandoffs,andusingtheAllenscrewsandwashers,fasten
theTBStothebaseplate.