RainPoint HTV213FRF - Troubleshooting

Problem Possible Factors Solution may help
Can't turn on
/o the valve
Inaccurate
water ow
meter
Timer can't
connect
•Low batte.
•Impurities in water
inlet.
•Unstable network or
delayed response.
•Inaccurate statistics
due to tilted
mounting angle.
•Low or erratic water
pressure from the tap.
•Unstable WIFI
network.
•Long distance from
the hub Timer not in
pairing state.
•Replace fresh batteries.
•Regularly clean the lter
po of impurities to avoid
disruptions in use.
• Wait a while and t again.
•The water timer needs to be
installed perpendicular to
the ground and it is
recommended that it is not
installed at an angle to
avoid aecting the water
count.
•Normal error values for
water counts ± 5%.
•Check that the WIFI network
environment is working.
•Close to hubs and routers
when connected to
irrigation timers.
•Re-pair the timer: Press and
hold the timer button until
the white light ashes
rapidly to indicate pairing.
(Or remove the device from
the homepage and
reconnect).
4. TROUBLESHOOTING
- 16 -