RainPoint HWG004 User Manual

-09-
• Click Switch Mode in the upper right corner to switch to AP
Connection.
Follow the guide on the APP
to press and hold the button
on the hub for about 5
seconds until it quickly blinks.
And then sho press the
button again.
When the Hub LED ashes
slowly, tick the checkbox on
the APP, click "Next", then
follow the wizard and click "Go
Connecting" to connect your
phone to the hotspot
(HomGar_xxxx).
Note:
If the mobile device pops up
that there is no signal and
needs to switch WiFi, please
do not switch, please keep the
selected hotspot
(HomGar_xxxx) to connect.

RainPoint HWG004 Specifications

General

Brand	RainPoint
Model	HWG004
Category	Irrigation System
Language	English