RainPoint HWG004 - 3.6 HCS008 FRF Water Flow Meter

-21-
Tips:
Please scan the QR code or search the link to
access the video to check the device quickly and
easily.
Setup Video: Setup Video: http://bit.ly/3jlwZle
3.6 HCS008FRF Water Flow Meter
1. Find＂Flow Meter＂or the icon to add the sensor.󶀅
2. Inse the batteries and the ow meter will get into the pairing
mode automatically. At the same time, select＂NEXT＂on the APP
and sta searching devices.
3. Keep the sensor and the hub close to each other to connect
automatically.󶀅
4. Besides that, you can also re-inse the batteries to reset and
reconnect if you fail to connect for the rst time.
5. After successfully connecting, the real-time water ow rate and
other information will show on the device home page.