-19-
Tips:
Please scan the QR code or search the link to access
the video to check the device quickly and easily.
Setup Video: https://www.youtube.com/watch?v=-
fRiQhyCqOwg
1. Find
"Air Humidity Sensor"or the icon to add HCS014ARF
Outdoor Thermo-Hygrometer Sensor when adding sub-devices.
2. Select "Next" and sta searching devices. At the same time, inse
the batteries, and then the red indicator will quickly blink once.
Please make sure the APP is already in searching before power
on the sensor.
3. Keep the timer and the hub close to each other, and they will
connect automatically.
4. After successfully connecting, the detected data will display in right
side of the hub’s screen under
"SENSOR".
3.4 HCS014ARF Outdoor Thermo-Hygrometer Sensor
To Next Page
Loading...
