RainPoint ITV201P - Page 20

ZONE L only ZONE R only ZONE L and ZONE R
4. Use the "+" or "-" button to adjust the manual watering time from 1
minute to 8 hours. Press "OK" to conrm and switch between hours or
minutes. (The default manual watering time is 10 minutes).
5. After setting the watering time, press the "OK" button immediately
within 5 seconds to sta manual watering and the pattern will
be displayed on the screen.
6. If you need to stop the manual watering, please hold the "MANUAL"
button for 3-5s to exit the manual watering mode and restore the
original watering program. (Or you can turn the dial to "OFF" to stop
the manual watering, but please remember to turn the dial to "ON"
again to restore the original watering program.)
NOTE:
1.Please remember to press the "OK" button after setting the manual
watering time to sta manual watering. Otherwise, the manual watering
setting will be automatically exited after the screen ashes for about
3-5s.
- 18 -
EN