To Next Page

To Previous Page

Safety and regulatory information

R&S

LCX Series

8Getting Started 1179.2254.02 ─ 03

Potential hazard

Read the product documentation to avoid personal injury or product damage.

Electrical hazard

Indicates live parts. Risk of electric shock, fire, personal injury or even death.

Hot surface

Do not touch. Risk of skin burns. Risk of fire.

Protective conductor terminal

Connect this terminal to a grounded external conductor or to protective ground. This

connection protects you against electric shock if an electric problem occurs.

1.2 Labels on the R&S LCX

Labels on the casing inform about:

●

Personal safety, see "Meaning of safety labels" on page 7.

●

Product and environment safety, see Table 1-1.

Table 1-1: Labels regarding R&S

LCX and environment safety

Labeling in line with EN 50419 for disposal of electrical and electronic equipment after

the product has come to the end of its service life. For more information, see the prod-

uct user manual, chapter "Disposal".

Grounding connection

Chassis grounding connection

Noiseless ground.

The input signal at these connectors must be free from external voltages. The mea-

surement results are otherwise incorrect.

1.3 Warning messages in the documentation

A warning message points out a risk or danger that you need to be aware of. The

signal word indicates the severity of the safety hazard and how likely it will occur

if you do not follow the safety precautions.

Warning messages in the documentation

R&S LCX Series Getting Started

Other manuals for R&S LCX Series