R&S XU 4200 - Fig. 3.56 Contrast Setting; Fig. 3.57 Screen Saver Timeout Setting

R&S XU 4200 Local Control (Local Mode)
6166.5368.02.01 3.64
Contrast Setting
Meaning
of entries
D i s
p
l a
y
S e t t i n
g
s
B C o n t r a s t
C
S II
-- -- -- -- -- I -- -- -- -- --
II
L 5 0 %
S
Fig. 3.56 Contrast setting.
Display text Description
Contrast Setting the contrast of the radio display is possible by pressing the ENTER
key while the cursor is pointing to the CONTRAST item. Then, a window
with a shifter appears. Using  or  cursor keys, the cursor will move to
the right, or left and contrast of the display will intensify, or reduce
accordingly. Percentage value is displayed below the shifter. The window
disappears after five seconds, or by pressing the ENTER key.
Screen Saver Timeout Setting
Meaning
of entries
S c r e e n S a v e r
N o n e
5 m i n
1 0 m i n
1 5 m i n
2 0 m i n
2 5 m i n
3 0 m i n
Fig. 3.57 Screen saver timeout setting.
Display text Description
Screen Saver Screen saver timeout values are displayed as an enumeration type. It is
possible to choose values from five to thirty minutes, or no value to disable
the screen saver.
Note: The screen saver is enabled by default with a timeout of 5 minutes.