NOTE: A DR2 requires a two-gang standard switchbox for installation into a wall.
DR3
The DR3 is extremely flexible, as it can control both selection and volume. You can think of the DR3 as two dif-
ferent remotes—a selector and a level. One knob makes a selection, the other knob changes the volume.
You can configure a DR3 in one of three ways:
l
Single Level & Selector: Control a level and selection from the same remote. For example, you could use a
DR3 to select the background music source and control the volume in a room.
l
Single Level & List of Toggles/Commands: This option allows you to control a single level and multiple
other items. For example, you could use a DR3 to control the volume in a room as well as acti-
vate/deactivate one or more listed presets that change the audio and control parameters for the room.
l
List of Levels: Choose from multiple levels. For example, you could use a DR3 to control the volume in
multiple rooms or zones from a single DR located at a hostess station or in a manager's office.
CHAPTER 2: Hardware Component Details
47
To Next Page
Loading...
