Rangevision SPECTRUM - Calibration Plate Information

Calibrationplate
Calibrationplateisaspecialplatewithmarkers,thedistancebetweenwhichis
measuredwithhighaccuracy.Itisusedforsettingupascanneranditscalibration.
Foreachscanningzoneaseparatecalibrationplateisused.Therearethreestandard
platesforSpectrum:ListhelargestandSisthesmallest.Theapproximatesizeof
platesisspecifiedintheScannersetup section.
ForcalibrationofrotarytableontheSscanareayoushouldusethe"axis evaluation"
plate.In thepicturebelowyoucanseedifferentcalibrationplate examples.
22