9 When the cleaning program has finished
running rinse the appliance down, including
behind the air baffle.
10 Wipe cabinet and door gasket with a damp
cloth, if necessary hinge back the inner pane
and wipe it down as well.
11 Close cabinet doors.
To dry the cabinet "Hot Air" mode is auto-
matically switched on for 10 minutes after
the cabinet doors have been closed.
12
You exit the cleaning program by selecting a coo-
king mode.
Note
• Leave the appliance door slightly open if it is
going to be idle for a prolonged period (e.g. over-
night).
• To stop the high-quality chrome nickel steel cor-
roding, your appliance must be cleaned regularly,
even if only operated at "Moist Heat ".
• If there is heavy soiling let the residues soften for
10 minutes at "Moist Heat" before cleaning.
• Do not treat unit with acids or expose to acid
fumes – this will damage the protective layer of
stainless steel and may cause the finish to disco-
lour.
• Do not use high pressure cleaners.
• Rinse the spray pistol nozzle and nozzle exten-
sion with clear water after every use.
• Rinse the cleaning bottle with warm water twice
a week.
• A couple of drops of salad oil will clear any stiff-
ness in the pump plunger.
End
0:10
Cleaning
- 30 -
To Next Page
Loading...
Need help?
General
