Replacing the door gasket
The door gasket comprises a vulcanised frame
which slots into a guide on the cooking cabinet.
If a gasket needs changing, pull the old gasket out
of the guide.
Clean any dirt from the guide rails.
When fitting the gasket make sure the rectangular
part of the gasket is inserted properly into the
frame.
It is advisable to dampen the retaining lips with
soapy water when assembling.
Cooking cabinet gaskets
Model 6 x 1/1 ET No. 20.00.394
Model 6 x 2/1 ET No. 20.00.395
Model 10 x 1/1 ET No. 20.00.396
Model 10 x 2/1 ET No. 20.00.397
Model 20 x 1/1 ET No. 20.00.398
Model 20 x 2/1 ET No. 20.00.399
Draining the steam generator
You can drain the steam generator before moving it
or to stop it freezing.
1
2 Close cabinet doors
3
Press core temperature button for 10 seconds
until "CLEn" appears on cabinet temperature
display
4
Rotate cabinet temperature knob to the right until
"SC" appears on the display
5
The steam generator is drained.
SC
CLEn
To Next Page
Loading...
Need help?
General
