Your appliance is equipped with the patented auto-
matic Self Clean system. Automatic Self Clean sig-
nificantly extends the period between descaling
intervals. The steam generator in your appliance
still needs regular descaling, depending on water
hardness and use.
We recommend the following descaling intervals,
based on 8 hours’ steaming per day:
up to18 °dH (to 3.2 mmol/litres) at least 1x annually
up to24 °dH (to 4.3 mmol/litres) at least 2x annually
over 24 °dH (to 4.3 mmol/litres) at least 3x annually
These recommended descaling intervals may vary
from the approximate values given above, depen-
ding on the composition of the water (e.g. mine-
rals).
Steam generator descaling
Caution!
• The process described involves working
with an aggressive chemical fluid
- corrosive!
• To prevent damage to materials and
health it is vital that you use:
protective clothing
safety goggles
protective gloves
face mask
the manufacturer’s descaling accessories
• Rinse descaling fluid spills
thoroughly with water.
1
2 Close cabinet doors
3
Press core temperature button down for 10
seconds until the cabinet temperature display
shows "CLEn"
4
Rotate cabinet temperature knob to the right
until "CALC" appears on the display.
5
The descaling process is started.
Note
If the cabinet temperature is over 40 °C when desca-
ling commences, "Cool Down" starts automatically –
see "Cool Down" display
The descaling process is continued if the cabinet tem-
perature is below 40 °C at commencement or after
"Cool Down".
CALC
CLEn
To Next Page
Loading...
Need help?
General
