Need help?Do you have a question about the Rational SelfCookingCenter series and is the answer not in the manual?
General| Manufacturer | Rational |
|---|---|
| Model | SelfCookingCenter series |
| Category | Kitchen Appliances |
| Control System | iCookingControl |
| Temperature Range | 30°C to 300°C |
| iCookingControl | Yes |
| iLevelControl | Yes |
| HiDensityControl | Yes |
| Energy Efficiency | High |
| Material | Stainless Steel |
| Steam Generator | Integrated |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Cooking Modes | Multiple (Steaming, Baking, Roasting) |
| Connectivity | Ethernet, USB |
| Cleaning System | Automatic cleaning system (SelfClean) |
| Power Supply | Varies by model (e.g., 400V) |
Demonstrates appliance use in your kitchen for specific requirements.
Offers further training, creative ideas, and kitchen method improvement.
Internet platform for chefs with recipes, videos, advice, and software.
Telephone consulting service for questions about applications or recipes, 365 days a year.
Provides swift and efficient help for technical difficulties with guaranteed spare parts.
Offers a 24-month warranty from initial installation if registered correctly.
Remove packaging, starter kit, grids, and containers before self-test.
Important checks to perform before switching on and operating the appliance.
Compliance with standards, safe smoking, and avoiding ceiling obstructions.
Rules for gas appliances and actions to take if a gas leak is detected.
Various safety guidelines to follow while operating the appliance.
Consequences of unauthorized installations, repairs, or modifications.
Warning about fire hazard if the appliance is not cleaned properly.
Instructions for maintaining and replacing the inlet filter.
Safety precautions for maintenance performed by trained technicians.
Table showing maximum load capacities for different appliance sizes.
Instructions for removing and resetting hanging racks.
Instructions for using mobile oven racks and transport trolleys.
Caution about hot probe and positioning aid, risk of burns.
Caution about hot water from the hand shower, risk of burns.
Shows appliance status and options after powering up.
Combi-steamer, iCookingControl, iLevelControl, Programming, CareControl.
Accessing iCookingControl, Combi-steamer, and Programming modes.
Use individual racks for different cooking processes simultaneously.
Detects cleaning needs based on usage and routines.
Shows cooking stage progress, climate, time, and temperature.
Explains various icons used in iCookingControl.
Shows prompts like Preheat, Cool down, Request to cancel.
Options like Hold at temperature, Heat up, Crisp.
Overview of cooking procedures and results.
Displays adjustments and decisions made by iCookingControl.
Notifies user of processes and adjustments made by iCookingControl.
Step-by-step guide for cooking chicken using iCookingControl.
Explains pictograms used in Combi-steamer mode.
Steam, Convection air, Combination of steam and convection heat.
Humidity, temperature, Delta-T, time, core temp, preheat settings.
MySCC, CareControl, Help, Programming, Back/Abort.
Call up programming function, Back/Abort.
Continuous operation, Humidification, Air speed, Cool down.
Set cooking time or enable continuous operation.
Sets a preheat temperature for the cooking cabinet.
Explains icons for creating, copying, changing, and deleting programs.
Displays saved images or program titles if no images are available.
Organizes programs alphabetically and allows filtering.
Saves current cooking workflow and changes.
Renaming and saving workflows with custom settings.
Create manual programs with up to 12 steps.
Use racks for multiple cooking processes, adapts time to load size.
Steps to select and start a saved program.
Allows checking individual program steps and their status.
Assigns programs to groups for classification, e.g., breakfast menu.
Assigns programs to one or several created groups.
Modifies existing programs, including name, steps, and parameters.
Duplicates an existing program, allowing renaming.
Removes individual programs from the appliance.
Deletes all created programs, processes, and groups.
Modifies program order or activates Day Part Management.
Arranges cooking processes by importance using a numerical order.
Explains icons used in iLevelControl, like food in selection window.
Select new food, delete food, or retain climate.
Adds saved foods to the selection window.
Saves an iLC cooking process with a name.
Steps to load food and initiate the cooking process.
Removes food items from time or selection window.
Saves combinations of food as shopping baskets.
Details on using multiple core temperature probes.
Shows appliance care status and soiling level.
Automatic display of cleaning request when necessary.
Information on the automatic cleaning system CleanJet®+care.
Safety precautions for using cleaning tabs.
Details cleaning stages like rinse, interim, light, medium, strong.
Procedure for handling cleaning program interruptions.
Explains icons for MySCC functions like Favourites, Settings, Acoustics.
Manage favourite menu items like language or time format.
Change language, time format, date/time, acoustics.
Customize acoustic signals like volume and duration.
Manage HACCP data, service data, programs, and profiles.
Monitor and manage energy consumption.
Access advanced settings like pre-program start time.
Configure display and access authorization rights.
Access appliance model, software version, and hotline numbers.
Steps to change the appliance's language.
Steps to set the appliance's date and time.
Set the appliance's time format to h:m or m:s.
Adjust cooking time format for programming steps.
Set the realtime format to 24h or am/pm.
Enable display of target time or time remaining.
Steps to completely switch off appliance lighting.
Setting options for appliance lighting.
Select LED lighting behavior when the door is open.
Setting options for lighting, door lighting, rack signalling.
Adjust LED lighting dimming level in 25% increments.
Indicates which rack needs loading/unloading in iLevelControl.
LED lighting flashes when a cooking process finishes.
Select between Celsius or Fahrenheit.
Adjust screen brightness using the central dial.
Adjust delay time for condensation hood shut-off.
Set plate weight for empty plates for à la carte/banquet.
Set the number and order of racks for iLC.
Set how long climate is maintained in the cooking cabinet during iLC.
Adjust master volume from 0% to 100%.
Turn keypad sound on or off.
Adjust keypad sound volume from 0% to 100%.
Customize melody, volume, sound length, and interval for various signals.
Save cooking programs from appliance to USB stick.
Save cooking programs from USB stick to appliance.
Delete all created programs, processes, and groups.
Load appliance profiles from USB stick onto appliance.
Upload appliance profiles from USB stick onto appliance.
Save user's food images from appliance to USB stick.
Save images from USB stick as food images.
Delete all user's food images.
Operate a second appliance's screen from the first appliance.
Display and edit IP address, gateway, and netmask.
Enter DNS server information for static IP addresses.
Set and edit information for a proxy server.
Configure data saving, software updates, and time sync.
Mirror or duplicate default settings onto other appliances.
Download energy consumption data in batches or analysis to USB.
Switch between various energy units like kWh or BTU.
Shows energy consumption after cooking or cleaning.
Program appliance to start automatically at a set day and time.
Displays current temperature at the core temperature probe.
Convert core temperature-controlled process to time-controlled in iCookingControl.
Select and run recorded programs, preheating starts automatically.
Prompts user to clean appliance after a defined time.
Program cleaning warnings or compulsory cleaning for weekdays.
Select between warning or compulsory cleaning modes.
Set a delay time for compulsory cleaning after a prompt.
Limit minimum/maximum core temperature for food.
Set minimum/maximum core temperature for finishing.
Restore the factory settings for core temperature.
Activate/deactivate iLC Messenger messages.
Activate/deactivate iCC Messenger messages in cockpit dialogue.
Monitor door opening time and adjust levels for loading/cooking.
Set time for loading warning messages.
Set time for cooking warning messages.
Change to a relevant profile view, may require password.
Upload and download appliance profiles via USB.
Edit profile name, set password, and define order of priority.
Customize which modes appear on the start screen for a profile.
Define visibility of Programming, iLC, CareControl modes on start screen.
Hide items except favourites, or edit favourites.
Set display and access rights for programs like image/list view, filter, sort.
Select which cleaning programs are activated.
Hide info/help buttons, display program group structure, header text.
Create a new profile in addition to the administrator profile.
Access programming mode and groups to customize profiles.
Add new profiles and edit their settings.
Edit profile name, set password, and define order of priority.
Set image/list view, disable filter, set zoom factor, etc.
View appliance model and software version.
Display chef hotline contact information.
Display service hotline contact information.
Monitor and control appliance remotely via iPhone/iPad.
Instructions for cleaning appliance doors and LED covers.
Procedures for removing and cleaning air filters.
Steps for removing and installing a new door seal.
Instructions for replacing LED and Halogen lamps.
Shows fault indications and how to suppress them.
Possible causes and rectifications for door leaks.
Cause and fix for unusual noises during operation.
Cause and remedy for non-functional interior lighting.
Troubleshooting low water level indicator.
Causes and solutions for leaks from the unit's base.
Checks for power supply and ambient temperature issues.
Cause and notification for foam at the outlet pipe.
Check outlet installation as per manual.
Check air baffle, racks, and contents during cleaning.
Soiled air filter requires replacement.
Check power supply polarity for gas units.
Check gas supply and pressure.
Cool down the cooking cabinet if it is too hot.
To Next Page