MySCC - Settings
112 / 203
Dimming the LED lighting door
Use this function to dim the LED lighting. This can be done in 25% increments from 0% to
100%.
Press the button and then turn the central dial to set the dimming level you
require in 25% increments.
Rack signalling
This function indicates in iLevelControl mode which rack needs to be loaded or unloaded.
The relevant rack is illuminated with the LED lighting.
To switch the rack signalling function on and off, press the Rack signalling
button.
Flashing signal to prompt an action
When this setting is enabled, the LED lighting flashes as soon as the appliance has
finished a cooking process.
If this setting is switched on as well as the rack signalling function, the finished rack flashes
in iLevelControl mode.
If this setting is switched off, all flashing signals are deactivated. In combination with the
rack signalling function, the finished rack stays illuminated.
To switch the flashing signal function on and off, press the Flashing signal to
prompt an action button.
To Next Page
Loading...
