Efficient CareControl
101 / 203
CleanJet
®
+care failure
After a power failure lasting longer than 10 minutes or after the unit is switched off the display
reads "Interrupt CleanJet". If Interrupt CleanJet
®
is not confirmed within 20 seconds by
pressing the display, the activated CleanJet
®
+care program runs through to the end without
interruption.
step info/button instructions
1 Switch the unit off and then on again.
2
cancel CleanJet?
Press the button and confirm cancellation.
3
Open door
Follow the instructions on the display and
open the door carefully – hot vapours!
4
Warning!
Always wear gloves when handling cleaner tabs
– risk of chemical burns.
5
Remove tabs
Remove cleaner tabs (if still present) and
close the cooking cabinet door.
6
00:09
The cooking cabinet is rinsed automatically,
the remaining time till the end is indicated.
7
Cleaning incomplete
You can now use your unit for cooking again.
To Next Page
Loading...
