Efficient CareControl
96 / 203
Start clean
CleanJet
®
+care is the automatic cleaning system for cleaning and caring for the
appliance.
The 7 cleaning programs allow you to adapt the cleaning process to the particular degree
of dirt.
Note!
- For hygiene reasons and to prevent malfunctions it is essential to clean your appliance every
day - risk of fire!
- Your appliance must be cleaned every day, even if it is only operated in “Steam” mode
- Only use cleaning and care tabs from the appliance manufacturer. The use of other cleaning
chemicals can damage the appliance. Liability is not assumed for damages as a consequence!
- If you use excessive cleaning chemicals, this can cause foaming.
- Never place the tabs in the hot cooking chamber (> 60 °C).
- Leave the appliance door slightly open if it is going to be idle for a prolonged period (e.g.
overnight).
- Cleaning the cooking chamber seal daily will extend the service life. Use a soft cloth and
washing-up liquid to clean the cooking chamber seal - do not use a scouring agent.
- Clean the glass panes inside and out and the outer panels of the appliance, ideally using a
soft, damp cloth. Do not use any abrasive or aggressive cleaning agents. Use mild household
washing-up liquid and regularly clean the steel with a steel cleaning agent.
To Next Page
Loading...
