EasyManua.ls Logo

Rational SelfCookingCenter series - Domestic Technology: Cleaning Glass and LED Covers; Cleaning Glass Panes and LED Covers

Rational SelfCookingCenter series
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Domestic technology
186 / 203
Cleaning the glass panes and the LED covers
The inside glass panes and LED covers can be
cleaned easily when necessary. The appliance doors
are fitted with their own pivoting glass panes.
Open the appliance doors to the 120° position and,
after pressing down both locking mechanisms, tilt the
first inside glass pane.
Clean the glass panes on both sides using a soft, damp
cloth or sponge and mild, household washing-up liquid
or glass cleaner.
Then press down both locking mechanisms and tilt
the second glass pane. You can then clean the space
between the second pane and the LED covers if
necessary using suitable cleaning equipment.
The door may not be cleaned with the integrated hand shower or high-pressure cleaner,
Only clean the glass panes and LED covers using a soft cloth or sponge. Do not use scouring
pads or scouring agents.
Only use gentle cleaning agents such as glass cleaner or washing-up liquid.
Never apply cleaning agents to hot surfaces. First leave the door to cool down.
Do not heat up the appliance when applying the cleaning agent.
The following cleaning agents may not be used:
Aggressive cleaning agent
Strong acids and alkali
Undiluted alcohols
Acetone and methanol
Oven cleaner, grill cleaner
Petrol, benzene, toluene or xylene
The LED cover is well protected against dirt behind the inside and middle glass pane.
Nevertheless, the area around the LED covers can become dirty.
Open the inside and middle glass pane to reach the LED cover.
The transparent part of the LED cover contains the LED optics. This LED optics is a high-
quality part designed to ensure optimum light distribution and brightness in the appliance.
Please observe the following information when cleaning the LED cover:
Only clean the cover using a cloth, sponge or household paper. Never use scouring
sponges or scouring agents.
Only use gentle, non-abrasive and diluted cleaning agents such as alcohol-based
cleaners such as glass cleaner (Ethanol-based) or washing-up liquid.
Do not use aggressive and abrasive cleaning agents such as: strong acids and alkali,
undiluted alcohols, acetone, methanol, oven cleaner, petrol, benzene, toluene or xylene.

Table of Contents

Related product manuals