Rational SelfCookingCenter series - MySCC System Management: Second Appliance Control; Ergonomic Control of Second Appliance

MySCC - System Management
129 / 203
Ergonomic control of a second appliance on the screen
This function is used to operate the screen of a second appliance on the appliance's
screen.
The screen of a second appliance is displayed on the screen of the first appliance and it is
possible to switch between both screens.
This supports for example a combi-duo installation where you can operate both appliances
from the upper appliance's screen.
Press the Ergonomic control of a second appliance on the screen button to
activate the function.
Press the Appliance name button and assign a name to the appliance in the
next step.
You can therefore distinguish between both connected appliances by their name.
Press the Appliance colour button and select a colour for this appliance.
Besides the appliance name, this is a second characteristic used to distinguish
between the two connected appliances.
This function is used to operate the screen of a second appliance on the appliance's
screen.
The screen of a second appliance is displayed on the screen of the first appliance and it is
possible to switch between both screens.
This supports for example a combi-duo installation where you can operate both appliances
from the upper appliance's screen.
Press the Ergonomic control of a second appliance on the screen button to
activate the function.
This function is used to operate the screen of a second appliance on the appliance's
screen.
The screen of a second appliance is displayed on the screen of the first appliance and it is
possible to switch between both screens.
This supports for example a combi-duo installation where you can operate both appliances
from the upper appliance's screen.