MySCC - Expert Settings
150 / 203
Forced cleaning
The forced cleaning function prompts the appliance user to clean the appliance after a
defined time has elapsed. When the cleaning prompt appears, the appliance can only
be used again once it has been cleaned. Use the forced cleaning function to ensure that
the cleaning and hygiene regulations are observed when the appliance is used in shift
operation.
step info/button instructions
1 Press the MySCC button.
2
Press the button for the Expert setting menu
item.
3 Press the Forced cleaning button.
4
Press the Activate/deactivate forced cleaning
button to switch the forced cleaning function
on or off. The image on the button shows that
forced cleaning is activated.
5
Press the Time to cleaning request button
and set the time (hours) until the next cleaning
request.
6
Press the Forced cleaning delay time button
and set the maximum number of hours that can
elapse between the prompt and the cleaning.
To Next Page
Loading...
