Rational SelfCookingCenter series - Using the Core Temperature Probe; Core Probe Handling Safety

Notes on using your appliance
27 / 203
Working with the core temperature probe
For information about working with the 3 core temperature sensor option, please read the
iLevelControl section.
Caution!
The core temperature probe and its positioning aid may both be hot – risk of burns!
Insert the core temperature
probe into the thickest point
of your cooking product.
You must insert the needle
through the middle of
the food (see application
manual).
Use the positioning aid
if the core temperature
probe could fall out of the
food(for instance if the food
to be cooked is of a soft
consistency or not very
thick).
For Finishing
®
with the
plate rack, insert the core
temperature probe into the
ceramic tube on the mobile
plate rack.
No externally attachable core temperature probes should be placed in the cooking chamber
through the cooking chamber wall during cleaning. These sensors must not be cleaned with the
chamber! This can cause leaks during cleaning.