MySCC - MyDisplay
164 / 203
You can also access the various profiles from the start screen. To
do this, press the arrow at the top right edge of the display.
Or alternatively press the bar at the top edge of the display. Once
this starts to flash red, you can change between the various
profiles using the central dial.
You can protect your profile from unauthorised access using a password. The protected
profile can only be disabled by entering the password. Please ensure that you do not lose
the password. Without the password, MyDisplay cannot be deactivated. In this case, please
contact the Customer Service.
Upload profile
Press the Upload profile button to upload the profiles from the USB stick onto
the appliance. Insert the USB stick before you press the button.
Download profile
Press the Download profile button to load profiles from the appliance onto the
USB stick. Insert the USB stick before you press the button.
To Next Page
Loading...
