Notes on using your appliance
25 / 203
Max. load sizes depending on appliance size
6 x 2/3 GN 20 kg (max. 10 kg for each rack)
6 x 1/1 GN 30 kg (max. 15 kg for each rack)
6 x 2/1 GN 60 kg (max. 30 kg for each rack)
10 x 1/1 GN 45 kg (max. 15 kg for each rack)
10 x 2/1 GN 90 kg (max. 30 kg for each rack)
20 x 1/1 GN 90 kg (max. 15 kg for each rack)
20 x 2/1 GN 180 kg (max. 30 kg for each rack)
If the maximum load sizes are exceeded, this can damage the appliance.
Please note the maximum load sizes for food in the application manual.
Table-top appliances with hanging racks
(6 x 1/1 GN, 6 x 2/1 GN, 10 x 1/1 GN, 10 x 2/1 GN)
- To remove, raise the hanging rack slightly in the middle.
Pull it out of the front, lower locking mechanism and
then from the top locking mechanism.
- Swivel the hanging rack to the middle of the cooking
chamber.
- Lift the hanging rack out of its fixing by lifting it up.
Reverse the above sequence to reset.
Table-top appliance 6 x 2/3 GN with hanging rack
- To remove the right hanging rack, hold the top of
the hanging rack and press it upwards. The hanging
rack releases from the 2 locking pins and can now be
removed.
- To install the hanging rack, align the hooks on the
hanging rack with the locking pins and press down on
the hooks until they engage in the locking bolts.
- To remove the left hanging rack, raise it slightly and
swivel it right into th cooking chamber to release both
locking pins from the air baffle. Use a screwdriver to
loosen the upper and lower locking hooks on the air
baffle. You can now remove the hanging rack together
with the air baffle. The left hanging rack can now be
removed together with the air baffle.
To Next Page
Loading...
