Draft diverter (gas appliances only)
Gas exhaust pipe diameter: 180 mm
Model 6x1/1 Art. No. 70.00.356
Model 6x2/1 Art. No. 70.00.359
Model 10x1/1 Art. No. 70.00.348
Model 10x2/1 Art. No. 70.00.349
Model 20x1/1 Art. No. 70.00.352
Model 20x2/1 Art. No. 70.00.343
UltraVent
®
condensation hood
The patented condensation technology used in the
UltraVent
®
condensation hood totally absorbs
steam in enclosed areas and discharges it through
the integral exhaust system. Vapour is automatically
fan-extracted, even when the cabinet door is open.
Significantly reduces unpleasant cooking smells. No
ventilation system needed. Easy to install and retro-
fit
Model 6x1/1 /10x1/1 GN E Art. No. 60.70.366
Model 6x1/1 /10x1/1 GN GArt. No. 60.70.370
Model 6x2/1 /10x2/1 GN E Art. No. 60.70.366
Model 20x1/1 GN E Art. No. 60.70.374
Condensation extractor hood for
table-top units
Vapour is automatically fan-extracted when the
cabinet door is opened (no condensation enginee-
ring). Easy to install and retrofit.
Model 6x1/1 /10x1/1 GN E Art. No. 60.70.366
Model 6x1/1 /10x1/1 GN GArt. No. 60.70.364
Model 6x2/1 /10x2/1 GN E Art. No. 60.70.408
Access ramp for 20 x 1/1
and 20 x 2/1 GN
Levels out unevenness in the kitchen floor to a
maximum of 20 mm in the direction of insertion.
Model 20x1/1 GN Art. No. 60.21.164
Model 20x2/1 GN Art. No. 60.22.086
To Next Page
Loading...
Need help?
General
