11
3 Installation instructions
3 Installation instructions
Standards > The mentioned standards are according to
German regulations.
> Local and country-specic standards and reg-
ulations regarding the installation and opera-
tion of commercial cooking appliances must
be observed at all times.
> In all other countries, the corresponding
country-specic standards and regulations
are to be observed.
Liability / Warranty > Damage occurring as a result of non-compli-
ance with installation instructions is excluded
from the warranty.
> Installations and repairs not carried out by
authorized professionals or not using original
spare parts, and technical modications to the
machine which are not approved by the man-
ufacturer, void the manufacturer’s warranty
and product liability.
Conformity > Device conformity is in reference to the over-
all unit at the time of delivery. The operator is
responsible for ensuring extended conformity
following any expansions/connection of
additional functions.
Connection work> The necessary connections (water, electricity,
and gas) must only be set up by trained profes-
sionals in accordance with local regulations.
Prior to installation > Check the device for transport damage.
If you suspect the device has been damaged
in transit, contact your specialist dealer/
freight forwarder immediately!
Disposing of old appliances > When the device reaches the end of its ser-
vice life, it must not be taken to a municipal
collection point for trash or used electrical
appliances. We would be pleased to assist
you in disposing of the device.
To Next Page
Loading...
Need help?
General