EasyManuals Logo

Rational COMBIMASTER Original Installation Manual

Rational COMBIMASTER
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
59
12 Initial start-up
Self test When first commissioning a new device, start a
one-time self-test. This test serves to adjust the
device to its specific ambient conditions.
It runs automatically, and takes between 45 and
65 minutes depending on the size of the unit; if
an UltraVent is in use, the test will take around
20 minutes longer.
> To perform the self-test, check the hook lad-
ders and the air baffle to ensure they are seat-
ed correctly.
> The device must be connected to water,
wastewater, and electricity as per installation
instructions; gas devices must also be con-
nected to gas supply and exhaust lines.
> The left side panel must be closed.
> With tabletop units, insert a flat GN container
into the middle of the hook ladders, with the
opening facing the bottom.
> With floor units, insert two GN into the
mobile oven rack: one centered in front of
each fan, with the openings facing the bot-
tom.
> Do not open the cooking chamber door
during the self-test.

Other manuals for Rational COMBIMASTER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rational COMBIMASTER and is the answer not in the manual?

Rational COMBIMASTER Specifications

General IconGeneral
ManufacturerRational
CategoryOven
TypeCombi Oven
CleaningAutomatic cleaning system
Power ConsumptionVaries by model
Steam InjectionYes
DimensionsVaries by model
WeightVaries by model
Temperature Range30-300°C
Cooking ModesConvection, steam, combination
Capacity10-20 gastronorm containers

Related product manuals