Program mode
50 / 107
You use the programming function to create and save programs manually. There are 2x50
program slots available with up to 6 cooking steps each for repeat cooking processes. So
that you can guarantee constant quality – even when you have assistants doing the cooking.
Create program
step info/button instructions
1
Use the selection button to set “Prog/Clean |
Start”.
2
You can change between program places 1–
50 and 51–100 by selecting one of the settings
buttons for cooking cabinet temperature.
3 Select a free program slot e.g. P4.
4
The display flashes to confirm the program slot
is vacant.
5 Press the button.
6
“S1” for step 1 appears on the display, and the
“prog/start” button flashes.
7 Select a cooking mode e.g. “steam”.
8
Set the required temperature or work with the
default setting.
To Next Page
Loading...
Need help?
General