HACCP
61 / 107
The data is stored for a period of 10 days and can be output via the USB interface on the unit
as required.. To save HACCP data permanently on a USB stick, please follow the instructions.
The USB stick should be connected when the unit is switched off.
step info/button instructions
1
Switch the unit off and insert the USB stick in
the slot underneath the control panel.
2 Use the selection button to set “prog/start”.
3 Turn the selection button clockwise.
4 Appears on the display.
5
Press the button to transfer the HACCP data to
the USB stick.
To Next Page
Loading...
