Service notifications
99 / 107
Should a fault occur in your appliance, this will be indicated on the display.
step info/button instructions
1
Faults in your appliance that allow the user
to continue using the unit for cooking can be
disabled by pressing the clock button.
fault indication when and how remedial action
E10 After switching on for
30 seconds.
The appliance is now ready for cooking
again. - Notify customer service!
E16 On occurrence of the
error.
Notify customer service!
E17 On occurrence of the
error.
Notify customer service!
E18 On occurrence of the
error.
Notify customer service!
E19 On occurrence of the
error.
Notify customer service!
E20 Will display for
30 seconds after
switching on or when
changing the mode.
Only limited cooking operation possible. -
Notify customer service!
E23 Is displayed
continuously.
Switch off the appliance - notify customer
service!
E24 Is displayed
continuously.
Switch off the appliance - notify customer
service!
E25/E26/E27 Must be confirmed
at the end of the
cleaning programme.
The appliance is now ready for cooking
again. Cleaning not possible. - Notify
customer service.
To Next Page
Loading...
Need help?
General