Rational iCombi Pro Series - Cleaning; Forced Cleaning; Cleaning Plan; Data Management

13 | Settings
76 / 112 Operating instructions
1. To activate the function, press the button: ON
>> The setting is immediately adopted.
13.7 Cleaning
1. Press the button
2. Press the button Cleaning
13.7.1 Forced cleaning
Here you can set how long you would like to pass before you receive a reminder to clean the unit. You cannot
work with the unit again until the cleaning has been performed. This means that you can ensure that cleaning and
hygiene regulations are observed when the unit is in shift operation. Click here for more information: Forced
cleaning [}90]
13.7.2 Cleaning plan
Here you can set on which days of the week you want the unit to perform a forced cleaning process. This means
that you can ensure that cleaning and hygiene regulations are observed when the unit is in shift operation. Click
here for more information: Cleaning plan [}90]
13.8 Data management
Please note that the data management functions are only available if you connect a USB flash drive to the unit.
1. Press the button
2. Press the button Data management
You can adjust the following settings:
n
Export HACCP data [}76]
n
Export error statistics log [}78]
n
Export and import programs [}77]
n
Export and import profiles [}77]
n
Export and import basic unit settings [}78]
13.8.1 Export HACCP data
Here you can export all HACCP data recorded by the unit to a USB stick. You can also have the HACCP data
automatically transferred to ConnectedCooking.
a You have connected a USB flash drive with the unit.