4 | How to work with the unit
14 / 112 Operating instructions
4 How to work with the unit
4.1 Initial start-up
When starting up your unit for the first time, it has already been properly installed by a RATIONAL Service Partner.
The self-test has already been performed and the unit is therefore ready for operation. You can find all the
information on installation in the installation manual enclosed.
Before working with the unit for the first time
1. Clean the unit and accessories before using the unit for the first time.
Click here for more information: Care [}92]
4.2 Switching the unit on and off
Switch on the unit
1. To switch on the unit, press and hold the button until the LED lights green:
> The unit will start. The start screen [}15] will appear.
Operation without water supply
If you operate the unit without a connection to a water supply, you will be asked after a short time to pour 3 litres
of water into the cooking cabinet. The symbol will be displayed in the footer:
1. Pour 3 litres of water onto the floor of the cooking cabinet.
2. To confirm the action, press the button:
Switch off the unit
1. To switch off the unit, press and hold the button until the LED lights orange:
> You will be asked whether you really want to switch off the unit.
2. To switch off the unit, swipe the bar to the right.
>> The unit will be switched off.
To Next Page
Loading...
Need help?
General
