14 | Kitchen management
86 / 112 Operating instructions
Registration without smartphone
1. Write down the PIN.
2. Log on towww.connectedcooking.com
.
3. Click on the symbol: Unit management
4. Select: Unit overview
5. Click on the symbol: Red cross with +
6. In the Name field, enter a unit name.
7. In the activation key field, enter the PIN displayed on the unit.
>> After a short time, the unit will be displayed in the unit overview of ConnectedCooking.
>> The display will show that the unit is connected with the ConnectedCooking server. The symbol appears in the
footer:
>> You will receive an e-mail confirming that the unit has been successfully registered.
Registration with smartphone
a You have installed an app on your smartphone that you can use to scan QR codes.
a You have installed the ConnectedCooking app on your smartphone.
1. Scan the QR code.
>>
>> After a short time, the unit will show that the unit is connected with the ConnectedCooking server. The
symbol appears in the footer:
>> The unit will be displayed in the unit overview of ConnectedCooking.
>> You will receive an e-mail confirming that the unit has been successfully registered.
14.4 Perform software update
Automatic software updates with ConnectedCooking
a Your unit is connected with ConnectedCooking.
1. Press the button
2. Press the button ConnectedCooking
3. To activate the Download software updates automatically function, press the button:
ON
4. Press the button
5. Press the button Service
6. Press the button
Software update info
7. Press the button Start installation
>> The software update is carried out and the unit is restarted.
Software update by USB stick
a You have connected a USB stick to the unit on which there is a software update.
a A message is displayed telling you that a software update has been detected.
1. Confirm the message that the software update should be carried out.
>> The software update is carried out and the unit is restarted.
To Next Page
Loading...
