Rational iCombi Pro XS 6-2/3 - Program Step End; End of Cooking Time; Process Interruption;Error Found

13 | Settings
Operating instructions 69 / 112
7. If you would like the tone to only continue for a certain time, press the button:
Continuous playback OFF
> The
tone length section will be active.
8. Set the duration on a 0 - 180 second scale.
9. To apply the setting, press the following button in the icon bar:
>> You will return to the overview.
13.4.3 Program step end
Here you can set which sound or melody you would like to sound when a program step is completed . You can
choose from 37 options.
1. Press the button
Program step end
2. Press the button
Sound
3. Press on the desired sound.
> The sound will play.
4. If you want to switch off the sound, press the button:OFF
5. Click on
in the icon bar to return to the overview.
6. If you would like the tone to continue until the unit is loaded or the action has been confirmed, press the
button:
Continuous playback ON
7. If you would like the tone to only continue for a certain time, press the button:
Continuous playback OFF
> The
tone length section will be active.
8. Set the duration on a 0 - 180 second scale.
9. To apply the setting, press the following button in the icon bar:
>> You will return to the overview.
13.4.4 End of cooking time
Here you can set which sound or melody you would like to sound when the cooking time has passed. You can
choose from 37 options.
1. Press the button
End of cooking time
2. Press the button
Sound
3. Press on the desired sound.
> The sound will play.
4. If you want to switch off the sound, press the button:OFF
5. Click on
in the icon bar to return to the overview.
6. If you would like the tone to continue until the unit is loaded or the action has been confirmed, press the
button:
Continuous playback ON
7. If you would like the tone to only continue for a certain time, press the button:
Continuous playback OFF
> The
tone length section will be active.
8. Set the duration on a 0 - 180 second scale.
9. To apply the setting, press the following button in the icon bar:
>> You will return to the overview.
13.4.5 Process interruption/error found
Here you can set which sound or melody you would like to sound when an error is detected. You can choose from
37 options.
1. Press the button
Process interruption/error found