5 | Placement
34 / 72 80.06.231_iVarioProL-iVarioProXL_IM_en-GB
3. Place the spirit level on the underside of the unit and align the unit with the
unit foot 4.
4. Check whether the unit cover and the pan are flush.
5. If the unit cover and pan are not aligned, readjust the unit using the unit
foot 4.
>> The unit is level.
>> The unit cover and the pan close tightly.
5.5 Fixing the unit in place
The manufacturer recommends that the unit be fixed to the installation sur-
face.
The unit attachment kit, including special adhesive, screws and dowels, is not
included in the scope of supply for the unit and can be ordered separately from
the manufacturer under item number 60.72.905.
To Next Page
Loading...
