Rational SelfCookingCenter XS UV - Power Supply Cable

19
6 Electrical connection
6.2 Power supply cable
ATTENTION!
In order to avoid hazards, the mains power
cable may only be replaced by the manufactu-
rer, its customer service representative or simi-
larly qualified personnel.
ATTENTION!
Non-functioning device !
Tighten mains lead cleat.
Connect a supply cable of at least Type H07RN-F
and tighten the mains lead cleat.
Connect the cable according to the following
diagram:
Gray connector terminals:
L1, L2, L3 (independent of rotary field).
Blue connector terminal:
Neutral conductor (neutral wire) (3NAC only).
Yellow-green connector terminals: Protective
conductors.