To Next PageTo Next Page
Need help?Do you have a question about the Ravelli SPILLO and is the answer not in the manual?
General warnings and important safety instructions for stove installation and use.
Explains the combustion process and how to adjust air/pellet settings for optimal flame.
Provides detailed technical specifications like height, weight, efficiency, and smoke temperature.
Specifies required clearances from walls, floors, and ceilings for safe installation.
Illustrates required clearances with specific measurements for various installation points.
Details suitable room conditions, ventilation, and installation placement for optimal operation.
Outlines special requirements for installing the stove in mobile homes, including anchoring and ventilation.
Shows examples of correct and incorrect flue installations, highlighting issues like ash buildup.
Specifies Canadian standards (CAN/ULC-S635, S640) for chimney liners for fireplace inserts.
Provides charts and methods to determine the correct exhaust pipe diameter based on altitude and pipe length.
Details the installation steps for wall thimbles, pipe sealing, and clearances for horizontal venting.
Allows modification of air inlet and pellet quantity for optimal combustion, especially with non-certified pellets.
Provides a comprehensive table of potential alarms, their reasons, and recommended solutions.
Shows the electrical connections for specific stove models, identifying key components.
Details methods for cleaning stove surfaces and the fire pot before each ignition.
General