Ravelli SPILLO - Mode SILENCE; Mode SELF CONTROL SYSTEM; Service Hours; Automatic Loading of the Screw

User and maintenance manual for stoves with RDS technology
Pag.29
01/02/2016
8.3. Mode SILENCE (to activate see para. 7.2.8)
Mode SILENCE has been realized for reducing noise level of fan. It reduce the speed of the fan in all ve working power.
Use is suggested especially during night time.
8.4. Mode SELF CONTROL SYSTEM (S.C.S. to activate see para 7.2.9)
Mode SELF CONTROL SYSTEM (S.C.S) has been realized allowing the stove to recognize faster an eventual problem just in case
you are out of home of far from the stove.
.
8.5. SERVICE HOURS
All our models need in addition to the regular cleaning (reference to the paragraph dedicated to the maintenance of the stove in the user
manual), also a special cleaning which should be done by the installer (authorized by the producer).
The timing for this cleaning is regulated by a preset countdown of working hours. At the end of these hours on the display will appear the
message “SERVICE HOURS” followed by an acoustic signal. When this message appears please contact the installer to do the special
cleaning of the stove.
If the cleaning is not done the message will appear by each ignition but will not interrupt the functioning of the stove.
8.6. Automatic loading of the screw
To load automatically the screw (when the stove is new or the loading scew is empty) please do following operations:
Enter in the menu “stove status”
Press key OK to activate the screw
To return to the main screen press at the same time keys 1 and 2.
Alternatively it is possible to exit by step from the menus by pressing each time the key OK.
Repeat the operation several times until you see the pellet fall into the repot.
It is possible to do this operation only if the stove is in FINAL CLEANING phase or OFF.
Screw OFF
Screw ON
After the switching o󰀨 phase, the display will show ECO STOP.
The stove will remain in this state until the temperature drops to
approximatly 18°C and only then the stove will start again.
The functioning of the stove in COMFORT CLIMA mode can start up the phase of ignition and switching o󰀨 several times through the
day: this can compromise the duration of the ignitor for the automatic ignition of the stove.
MAR
Smokes
Screw status
Smokes
Screw status