User and maintenance manual for stoves with RDS technology
Pag.14
01/02/2016
6.4. Examples of installation (only for pellet fireplace insert)
The damper area must be sealed with a steel plate and a
non-combustible insulation on the top of the plate to reduce
the possibility of condensation.
This replace has not been tested with unvented Gas log set.
To reduce risk of injury, do not install an unvented gas log
set into this replace. Do not pack required air spaces with
insulation or other materials. Do not use a replace insert or
other products not specied for use with this replace.
Fire stop
Storm Collar
Rain cap
Roof flashing
To Next Page
Loading...
